1.1.1 Faisnéis Ghinearálta
Úsáidtear an caidéal TPH400 i ngach céim d'oibríocht oilfield chun uisce, stroighin, sreabhán briste agus sreabhán spreagtha eile a phumpáil. Tá na cleití seo a leanas uathúil don chaidéal TPH400:
- Féadann sé caidéalú ag brúnna chomh hard le 20,000 psi (137.6 MPa).
- Ceadaíonn a dhearadh dlúth éascaíocht gléasta agus iompair.
- Soláthraíonn sé ardfheidhmíocht, iontaofacht, marthanacht agus saol fada.
- Tá trí mhír dheiridh sreabháin ar leith ann ar féidir iad a athsholáthar ina n-aonar.
1.1.2 Caidéal Cóimeáilte
Is iad na trí phríomhchodanna caidéil
(1) An deireadh cumhachta,
(2) An deireadh sreabhach,
(3) An córas lube
1.1.3 Cumhacht Deireadh
Laghdaíonn an comhthionól deiridh an luas, iolraíonn sé an chasmhóimint, agus athraíonn gníomh rothlach ina gníomh frithingeach. Glacann sé fuinneamh a sheachadann an t-inneall agus an tarchur agus déanann sé é a athrú go fuinneamh ar féidir leis na foircinn sreabhach a úsáid. Déantar foircinn cumhachta a shaincheapadh chun freastal ar riachtanais an phoist agus spás a chaomhnú ar an leantóir nó ar an aonad trucail. Tá cásanna ar fáil i leaganacha ar dheis agus ar chlé. Go hiondúil, úsáideann trealamh stroighne tacair fearas Holroyd (8.6:1) le haghaidh caidéil TPH400 agus trealamh briste a úsáideann giaranna tiomántáin cón (8.4:1). I measc na ngnéithe saincheaptha eile tá:
- Córais lube
- flanges chompánach
- Cóimheasa giair - agus fáinne -
- Dearadh malartóir teasa
|
TPH400 Caidéal Sonraíochtaí agus Sonraí |
|
|
Tábla 1.2-Cumhacht Deireadh |
|
|
Compánach flange |
Spicer Sraith 1800 |
|
Ionchur Splín |
3-in.- 10 (7.62 mm) |
|
Ionchur Rothlú |
Deiseal |
|
Pluiméir Stróc |
8in(203.2mm) |
|
Ionchur Luas w18.4:1 nó 8.6:1 Giaranna |
2,400 (Uasmhéid rev/mm) |
|
Uasmhéid Ionchur chasmhóiminte |
7,215 lbf (9,782.227 Nm) |
|
Uasmhéid Ionchur Capallchumhachta |
600hp(447kw)----8.6:1 |
|
Fearas Traein |
Péist chruach agus fáinne cré-umha w/ 8.4:1 nó cóimheas 8.6:1 (caighdeánach) |
|
Crochadán |
Cruach brionnaithe, ceithre phríomh-imthacaí |
|
Ag nascadh Slatanna |
Trí, alúmanam brionnaithe, caipíní scoilte, agus cuir isteach imthacaí |
|
Croscheann |
Trí, cruach teilgthe |
|
Cás |
Táthú cruach ard-neart |
|
Bearradh Cineál |
Sorcóir agus rás |
|
Ola Córas |
Caidéal fearas tiomáinte as péist (STD) nó cianda |
|
Ola Scagaire |
Eilimintí in-athsholáthair agus strainer maighnéadach (Schroeder) |
|
Ola Cumas |
22 gal SAM (83L) |
|
Ola Brú |
80 go 100 psi (0.552 go 0.689 MPa) |
|
íosmhéid Ola Sreabhadh |
36GPM(136M3PM) |
|
Meáchan |
3,864 lb (1,752 kg) |
, P
| TPH400 Cumhacht Chaidéil-Deiridh Páirteanna | ||
| Companion Flange Fo-thionól | ||
| Cuid | Ceathair | Cur síos |
| P40-14-600 | FO-CHUIDEACHTA FLANGE | |
| P40-14-501 | 1 | FLANGE, COMPANION,6 1/6", 1-951 SPICER |
| P40-14-502 | 1 | Washer, WORM YOKE Coimeádaí |
| P40-14-503 | 1 | nigheoir, glas, coimeádán cuing péisteanna |
| X20-08-509 | 2 | HHCS,.375-16UNCX1 1/4"FAD |
| Worm Gear Drive{0}}Comhthionól Deiridh | ||
| Cuid | Ceathair | Cur síos |
| P40-14-300 | GEAR, WORM 8.6:1 (HOLROYD) FO-CHUID | |
| P40-14-101 | 4 | SCRiú, CBT CEANN SOICÉID, 3/8"-16NCX1 1/4" |
| V06-68-473 | 4 | nigheoir, cothrom, 3/8" SAE, CRUACH |
| P40-14-103 | 1 | CLÚDACH, SEALADÓIR OLA |
| P40-14-104 | 1 | SEAL, OLA, 53-IN. X 7448, FL, 4"BX5 1/2"ODX1/2"WIDE |
| P40-14-106 | 2 | GASCET, CRÍOCH IONCHUR THITHE WORM |
| P40-14-107 | 1 | COINNEÁLA, IOMPAR, WORM-DRIVE END |
| P40-14-105 | 1 | AG IOMPAR, CUIR DEIREADH-WORM SHAFT |
| P40-14-311 | 1 | GEAR, WORM, SUB-ASSY,8.6:1 , POWER-END ASSY |
| P40-14-116 | 1 | AG IOMPAR, TRUST-END, SHAFT WORM |
| P40-14-118 | 1 | BRUSHING, THRUILLEADH TRUST WORM |
| P40-14-109 | 1 | EOCHAIR, WORM-TRUST A THÉANANN SPACER |
| P40-14-122 | 1 | IOMPAR, TRUST, WORM Cruachán |
| P40-14-117 | 1 | EOCHAIR, WORM-THHRUST BEARING |
| P40-14-120 | 1 | NUT, LOCK, SPLIT-DEIREADH THRUST WORM, LÁIMHE DEIS |
| P40-14-121 | 1 | Scriú, CBT CEANN SOICÉID,#10-32NFX1/2", |
| P40-14-310 | 1 | ADAPTER-BROWN. Caidéal bealaidh géar |
| 000P569267 | 1 | O-Cuir glaoch ar, NITRILE 90 DURO #267, PEROXIDE CURED |
| P40-14-115 | 1 | COINNEÁLA, IRON WORM-THRUST END PEARING |
| P40-14-124 | 3 | SHIM, IDIRLÍN, IOMPAR TRÍTH Péist, 0.005" |
| P40-14-125 | 3 | SHIM, IDIRLÍN, IOMPAR TRÍTH Péist, 0.010" |
| P40-14-126 | 3 | SHIM, IDIRLÍN, IOMPAR TRUST worm,0.020" |
| 000P569264 | 1 | O-Cuir glaoch ar, NITRILE 90 DURO #264, PEROXIDE CURED |
| P40-05-700 | 1 | PUMP, ASSY, OLA, 100GPM, TUTHILL |
| P40-14-219 | 8 | Scriú, CAP, WORM HOUSING, CEART-HAND |
| P40-14-316 | 4 | STUD-LG LOC INSERT-TUTHILL OIL PUMP MTG |
| V06-45-482 | 4 | Cnó, HEX TROM, 1/2-13 |
| Fo-thionól Ring Gear | ||
| Cuid | Ceathair | Cur síos |
| P40-14-200 | GEAR, RING, FO-ASSY, POWER-DEIREADH ASSY (AN LÁIMHE DEIS) | |
| P40-14-204 | 1 | Sreangán, Píobán Sorn, 19 GA,72" FAD |
| P40-14-241 | 6 | Scriú, CAP, SPLINE DRIVE-FLANGE |
| P40-14-205 | 1 | Damhán alla, coimeádaí TAPA CRANKSHAFT |
| P40-14-211 | 3 | Sreangán, Píob Sorn, 19 GA., 190" FAD |
| P40-14-213 | 24 | NIGHTHE, AR CHÉILE-GEARAS LÁIMHE AG TIOMÁNA GLAMP |
| P40-14-212 | 48 | Scriú, CBT, Fáinne, GLÉASÚ, CLAMP GEARAIS |
| P40-14-214 | 2 | Slat, Táthú, L-61,1/8", 95" FAD |
| P40-14-215 | 2 | TEAGMHÁLAÍ, NÍL . 8, 128-B CLEACHTADH |
| P40-14-216 | 1 | FLANGE, Tiomántán Splíona GEAR |
| P40-14-218 | 1 | Sreangán, Píobán Sorn, 19 GA, 190" FAD |
| P40-14-220 | 1 | Fáinne, TRUST, GEAR AG IOMPAR |
| P40-14-219 | 16 | Scriú, CAP, WORM HOUSING, CEART-HAND |
| P40-14-222 | 3 | SHIM, Imréitigh, TACAÍOCHTA GEARAIS, 0.005" |
| P40-14-223 | 3 | SHIM, Imréitigh, TACAÍOCHT GEARÁL, 0.010" |
| P40-14-224 | 3 | SHIM, Imréitigh, TACAÍOCHTA GEARÁL, 0.020" |
| P40-14-201 | 1 | ADAPTER, CLAMP, CEART-HAND GEAR SPLINE Drive |
| P40-14-428 | 1 | GEAR, RING, FO-ASSY,8.6:1 , POWER-END ASSY |
| P40-14-225 | 1 | BEARING, GEAR TACAÍOCHT |
| P40-14-229 | 24 | LUG, GEAR A BHFUIL CLAMP, CEART-LÁIMH |
| P40-14-234 | 1 | TACAÍOCHT, BEARING, RING GEAR |
| P40-14-232 | 16 | Scriú, CBT CEANN SOICÉID, 1/2"-13NCX1 1/4" |
| P15-36-014 | 16 | nigheoir, glas, 1/2" INT CRUTHDHEONACH |
| P40-14-236 | 3 | SHIM, POISTING, GEAR SIDE, 0.005" |
| P40-14-237 | 3 | SHIM, POIST, GEAR SIDE, 0.010" |
| P40-14-238 | 3 | SHIM, POISTING, GEAR SIDE, 0.020" |
| P40-14-202 | 1 | UAP, COTTER, 1/8"X1 1/2", SPRING STEEL |
| P40-14-203 | 1 | NUT, Sliotán heicsidheachúlach,1"-14NF, PL |
| P40-14-206 | 1 | Bushing, spásaire damhán alla |
| P40-14-207 | 3 | SHIM, SUÍOMH, CRANKSHAFT AXIAL, 0.020" |
| P40-14-208 | 3 | SHIM, SUÍOMH, CRANKSHAFT AXIAL, 0.040" |
| P40-14-209 | 3 | SHIM, SUÍOMH, CRANKSHAFT AXIAL, 0.060" |
| P40-14-210 | 1 | Cúpláil, CRANKSHAFT, Tiomántán Splín |
| P40- 14-240 | 1 | Graí, FLANGED, TRUST CRANKSHFT |
| P40-14-242 | 1 | Sreangán, Píobán Sorn, 19 GA, 24" FAD |
| V06-50-322 | 4 | Washer, Spring Lock, CRUACH, 1/2" ID |
| Cuid | Ceathair | Cur síos |
| P41-14-400 | FO-CHUID FO-CHUID GEAR(HOLROYD) (NA LÁIMH CHÉIL) | |
| P40-14-204 | 1 | Sreangán, Píobán Sorn, 19 GA,72" FAD |
| P40-14-241 | 6 | Scriú, CAP, SPLINE DRIVE-FLANGE |
| P40-14-205 | 1 | Damhán alla, coimeádaí TAPA CRANKSHAFT |
| P40-14-211 | 3 | Sreangán, Píob Sorn, 19 GA., 190" FAD |
| P40-14-213 | 24 | NIGHTHE, AR CHÉILE-GEARAS LÁIMHE AG TIOMÁNA GLAMP |
| P40-14-212 | 24 | Scriú, CBT, Fáinne, GLÉASÚ, CLAMP GEARAIS |
| P40-14-214 | 2 | Slat, Táthú, L-61,1/8", 95" FAD |
| P40-14-215 | 2 | TEAGMHÁLAÍ, NÍL . 8, 128-B CLEACHTADH |
| P40-14-216 | 1 | FLANGE, Tiomántán Splíona GEAR |
| P40-14-218 | 1 | Sreangán, Píobán Sorn, 19 GA, 190" FAD |
| P40-14-220 | 1 | Fáinne, TRUST, GEAR AG IOMPAR |
| P40-14-219 | 16 | Scriú, CAP, WORM HOUSING, CEART-HAND |
| P40-14-222 | 3 | SHIM, Imréitigh, TACAÍOCHTA GEARAIS, 0.005" |
| P40-14-223 | 3 | SHIM, Imréitigh, TACAÍOCHT GEARÁL, 0.010" |
| P40-14-224 | 3 | SHIM, Imréitigh, TACAÍOCHTA GEARÁL, 0.020" |
| P40-14-428 | 1 | GEAR, RING, FO-ASSY,8.6:1, POWER-END ASSY |
| P41-14-225 | 1 | BEARING, GEAR TACAÍOCHT |
| P40-14-234 | 1 | TACAÍOCHT, BEARING, RING GEAR |
| P40-14-232 | 16 | Scriú, CBT CEANN SOICÉID, 1/2"-13NCX1 1/4" |
| P15-36-014 | 16 | nigheoir, glas, 1/2" INT CRUTHDHEONACH |
| P40-14-236 | 3 | SHIM, POISTING, GEAR SIDE, 0.005" |
| P40-14-237 | 3 | SHIM, POIST, GEAR SIDE, 0.010" |
| P40-14-238 | 3 | SHIM, POISTING, GEAR SIDE, 0.020" |
| P40-14-202 | 1 | UAP, COTTER, 1/8"X1 1/2", SPRING STEEL |
| P40-14-203 | 1 | NUT, Sliotán heicsidheachúlach,1"-14NF, PL |
| P40-14-206 | 1 | Bushing, spásaire damhán alla |
| P40-14-207 | 3 | SHIM, SUÍOMH, CRANKSHAFT AXIAL, 0.020" |
| P40-14-208 | 3 | SHIM, SUÍOMH, CRANKSHAFT AXIAL, 0.040" |
| P40-14-209 | 3 | SHIM, SUÍOMH, CRANKSHAFT AXIAL, 0.060" |
| P40-14-210 | 1 | Cúpláil, CRANKSHAFT, Tiomántán Splín |
| P40- 14-240 | 1 | Graí, FLANGED, TRUST CRANKSHFT |
| P40-14-242 | 1 | Sreangán, Píobán Sorn, 19 GA, 24" FAD |
| V06-50-322 | 4 | Washer, Spring Lock, CRUACH, 1/2" ID |
| Fo-thionól Príomhiompair Crankshaft | ||
| Cuid | Ceathair | Cur síos |
| P40-12-000 | FO-THÓMHAR CRANKSHFT, CUMHACHT-DEIREADH TIONÓL | |
| P40-12-004 | 5 | Cupán, SEAL COGANTÓIR, CRANKSHFT ROD |
| P40-12-006 | 3 | Scriú, CBT, Coinnitheoir SÉALA |
| 000P569338 | 5 | O-Cuir glaoch ar, NITRILE 90 DURO #338, PEROXIDE CURED |
| P40-12-003 | 6 | WASHER, STAT-O-SEAL, 1/4"7100-1/4" |
| P40-12-002 | 6 | NIGHTHE, COMHRÉAL, 3/16", WI-PL |
| P40-12-001 | 3 | NUT, STOP leaisteacha, 1/4-28NF-LT,21NE-48 |
| P40-12-007 | 1 | Plocóid, CRANKSHFT ROD Iris |
| P40-12-008 | 1 | tionóil CRANKSHFT |
| X20-05-052 | 4 | SHCS, 0.312-18 UNC X 1.00" |
| V06-50-225 | 4 | Washer, Spring Lock CRUACH MEÁN 5/16" BOLT |
| P40-12-022 | 4 | WASHER, CINEÁL EACHTRACH |
| P15-01-012 | 4 | NUT, STOP leaisteacha, 5/16" 18NC |
| P40-12-015 | 8 | Níochán, CINEÁL EACHTRACH, CRANKSHFT, PRÍOMHTHOMHARC |
| X20-08-739 | 4 | HHCS, 5/16"-18 X 3-3/4", Críochnaigh PLAIN, GRÁD SAE J429 8 |
| P40-12-016 | 3 | SHCS, 1/2"-13NCX3", Snáithe IOMLÁN, W/HOLES |
| P40-12-009 | 6 | GLÉASRAÍ, COINNEÁLAÍ, CINEÁL ISTEACH, PRÍOMHDLEACHT TROM BEARTA |
| P40-12-010 | 12 | NUT, FÉIN{0}}Glasáil, 1/2"-13NC, PL |
| X20-08-595 | 6 | HHCS,.500-13UNCX3 1/2"FAD, SAE GRÁD 5 |
| P40-12-012 | 15 | nigheoir, BEARIGN COGÁNAIGH, brionnaithe |
| P40-12-013 | 3 | Scriú, HEX CEANN , 1/2"-13NCX2 3/4", PL |
| P40-12-021 | 1 | GLÉAR, COINNEÁLA, CEART-LÁIMHE |
| P40-12-014 | 2 | BEARING, PRÍOMH OUTBOARD |
| P40-12-019 | 2 | BEARING, PRÍOMH INBOARD |
| Fothionól Trascheann agus Slat Nascála | ||
| Cuid | Ceathair | Cur síos |
| P40-13-000 | FO-CHUMHACHT SL A CHONNÚ, CUMHACHT-END tionóil |
|
| P40-13-011 | 3 | SLÍODH, TIP CROSSHEAD |
| P40-13-021 | 3 | SHIM, Sleamhnán CROSSHEAD, 0.002" |
| P40-13-022 | 3 | SHIM, Sleamhnán CROSSHEAD, 0.005" |
| P40-13-023 | 3 | SHIM, Sleamhnán CROSSHEAD, 0.010" |
| P40-13-024 | 4 | FOOT, CEART-CROSSHEAD CLAMP LÁIMHE |
| P40-13-001 | 1 | Sreangán, Píobán sorn, 19 GA, 144" FAD |
| P40-13-025 | 4 | Scriú, CLAMP Sleamhnáin CROSSHEAD |
| P40-13-026 | 4 | FOOT, LIFT-CLAMP SLÍDIGH CROSSHEAD LÁIMH |
| P40-13-020 | 3 | SLÍD-BOTTOM, CROSSHEAD |
| P40-13-029 | 4 | Clamp, OUTBOARD, CROSSHEAD sleamhnán |
| P40-13-028 | 8 | Scriú, soicéad tacair, 1/4-20X1/4", CUP POINT |
| P40-13-027 | 8 | Scriú, 1/4"-20NCX1", CUP PT, HEX SOCKET, PL |
| P40-13-002 | 3 | AG NASCADH-ROD FO-CHUIDEACHTA, CUMHACHT-END tionóil |
| P40-13-037 | 3 | AG IOMPAR, AG NASCADH-ROD, TPH400 |
| P40-13-003 | 3 | DOWEL, AG NASCADH-ROD CAP |
| P40-13-008 | 6 | EOCHAIR, UAP CROSSHEAD |
| P40-13-006 | 3 | Scriú, CBT, COINNEÁIL, UAP CROSSHEAD |
| P40-13-010 | 3 | NUT, STOP leaisteacha,5/16"-24NF, LT,21NE-054 |
| P40-13-007 | 6 | Washer, DISHED |
| P15-13-013 | 18 | Scriú, ceann soicéad cothrom, 1/4-20NCX5/8" |
| P40-13-019 | 3 | Bróg BOTTOM, CROSSHEAD |
| P40-13-030 | 3 | SHIM, CROSSHEAD BUN, 0.005" |
| P40-13-031 | 3 | SHIM, CROSSHEAD BUN, 0.010" |
| P40-13-018 | 3 | CROSSHEAD, MACHINED |
| P40-13-009 | 3 | UAP, CROSSHEAD |
| P40-13-014 | 3 | SHIM, Bróg CROSSHEAD, BARR, 0.003" |
| P40-13-015 | 3 | SHIM, Bróg CROSSHEAD, BARR, 0.005" |
| P40-13-016 | 3 | SHIM, Bróg CROSSHEAD, BARR, 0.010" |
| P40-13-017 | 3 | SHIM, Bróg CROSSHEAD, BARR, 0.020" |
| P40-13-013 | 3 | Bróg BARR, CROSSHEAD |
| Fochóimeáil Píobáin Shúchán, Cumhacht-Críoch | ||
| Cuid | Ceathair | Cur síos |
| P40-05-100 | Fo-thionól Píobáin Shúchán | |
| V06-37-882 | 1 | Breiseán, Píobán, 1-1/2" STD SQ, CRUACH INMHILLEADH |
| P40-05-105 | 4 | Nighteoir, SÉALÚ, 1/4", CARB CRUACH, PLATED |
| X20-27-250 | 4 | NIGHTHE, COMHRÉAL, 1/4"SAE |
| X20-08-573 | 4 | HHCS,.250-20UNCX0.750" |
| P40-05-108 | 1 | GASCET, ELL Malartóir Teasa Flanged |
| P40-05-109 | 1 | Elbow, Flange A HOSE, W/DRAEN, CÓRAS OLA |
| X04-00-753 | 2 | CONSTANT{0}}TORQUR WORM-DRIVE CLAMPS |
| X26-01-409 | 0.56 | MÉID Píobáin: 421-32 N0-SKIVE |
| X26-22-124 | 1 | oiriúntóir, feisteas caighdeánach maolaithe, 2"NPT, CS |
| X26-02-092 | 1 | ELBOW, Z2"-Z2" |
| X26-02-560 | 1 | breiseán, 2"NPT |
| Fo-thionól Bealaidh Scagaire/Strainer Schroeder | ||
| Cuid | Ceathair | Cur síos |
| P40-05-000 | CUMHACHT-CÓRAS DEIREADH LÚBE FO-CHUISCE, AR CHÉILE-LÁIMH |
|
| X20-08-576 | 10 | HHCS, 5/16"-18UN 1"FAD SAE GRÁD 5" |
| X20-28-509 | 12 | nigheoir, glas, 5/16" |
| P15-12-031 | 1 | NUT, 63121 Cosantóir Snáithe, 7/8"-18UNS W |
| P15-11-031 | 1 | Gaiscéad, oiriúntóir Tiomántán, CBT, Cuntóir galún |
| P15-10-031 | 1 | INJUCTOR, OLA, CRANKSHAFT, W/# 20 HOSE oiriúntóir |
| P15-09-031 | 1 | GASCET, INJUCTOR, CRANKSHAFT, OLA |
| P15-08-031 | 1 | RING, COINNEÁIL |
| 000N567126 | 1 | O-Fágáil, NITRILE 70 DURO |
| P15-05-031 | 1 | SEAL, MHAIGHNÉADACH, SHAFT, MSC, 65152 REV B |
| 000N567120 | 1 | O-Fágáil, NITRILE 70 DURO |
| P15-04-031 | 1 | RING, SÉALA |
| P15-03-031 | 1 | BUSHING, mhaighnéadach, inslitheoir rónta & COUNTERDRIVE |
| P40-05-216 | 1 | MÁIRTEACH, STRAINER OLA AGUS Scagaire, MEAISÍNTE |
| X20-08-505 | 8 | HHCS,.500-13UNCX1", GRÁD 8, ZINC PLATED |
| V06-50-322 | 8 | Washer, Spring Lock, CRUACH, 1/2"ID" |
| X20-08-681 | 2 | HHCS,.312-18UNCX1.5"FAD" |
| 000P569234 | 2 | O-Fágáil, NITRILE 90 DURO |
| P40-05-206 | 1 | MÁIRTEACH, STRAINER OLA AGUS Scagaire, MEAISÍNTE |
| 000P569225 | 2 | O-Fágáil, NITRILE 90 DURO |
| P40-05-430 | 1 | Scagaire, OLA, EILIM, W/Súchán Maighnéadach SEPARATOR SKB 1 1/2 |
| P40-05-255 | 1 | ADAPTER, HOSE,,90, 1 1/2", SPLIT FLANGE |
| X26-02-924 | 2 | FLANGE, CÓD SAE 61,1-1/2", UN 1/2"-13X1-1/2" |
| P06-00-370 | 1 | Tube, OIL LINE, LEFT-HAND, W/HOSE |
| P40-05-032 | 3 | BOLT, diallait, OILEÁN CROSSHEAD |
| P40-05-033 | 6 | Washer, SÉALA 1/2" |
| P40-05-034 | 6 | Diallait, LÍNE OLA, CROSSHEAD OILER |
| 000P569118 | 6 | O-Fágáil, NITRILE 90 DURO |
| X26-11-086 | 1 | MODEL HOSE ASSY: 421 06 06 06 06 06 500 |
| X26-02-804 | 1 | ADAPTER, DÍreach, 3/8" NPT MALE X 9/16-18 JIC MALE |
| X26-02-721 | 1 | ELBOW, 1/4"NPTM X 7/16"-20 JIC37 Fireann, CRUACH |
| P60-05-007 | 1 | HOSE ASSY - 10.00" LG W/1/4" SEA 37 DEG SWVL CRÍOCH |
| X26-02-722 | 1 | oiriúntóir, 1/8"NPTM X 7/16-20 JIC37 Fireann |
| P40-05-420 | 1 | Scagaire, OLA, EILIM, 25M |
| P40-05-049 | 1 | CLAMP, EXHAUST, 4 1/2", STEMCO |
| P40-05-048 | 1 | BRAKET, SCHROEDER, FILTER |
| X00-01-571 | 2 | NUT, 3/8"-16UN-3B |
| Cuid | Ceathair | Cur síos |
| P40-05-001 | CUMHACHT-CÓRAS DEIREADH LÚBE SUBASSEMBLY, AR DHE-LÁIMHE |
|
| X20-08-576 | 10 | HHCS, 5/16"-18UN 1"FAD |
| X20-28-509 | 12 | nigheoir, glas, 5/16" |
| P15-12-031 | 1 | NUT, 63121 Cosantóir Snáithe, 7/8"-18UNS W |
| P15-11-031 | 1 | Gaiscéad, oiriúntóir Tiomántán, CBT, Cuntóir galún |
| P40-05-255 | 1 | ADAPTER, HOSE,,90,1 1/2", SPLIT FLANGE |
| P15-10-031 | 1 | INJUCTOR, OLA, CRANKSHAFT, W/# 20 HOSE oiriúntóir |
| P15-09-031 | 1 | GASCET, INJUCTOR, CRANKSHAFT, OLA W/#20 oiriúntóir |
| P15-08-031 | 1 | RING, COINNEÁIL |
| 000N567126 | 1 | O-Fágáil, NITRILE 70 DURO |
| P15-05-031 | 1 | SÉALA, MHAIGHNÉADACH, SHAFT, MSC, 65152 REV B |
| 000N567120 | 1 | O-Fágáil, NITRILE 70 DURO |
| P15-04-031 | 1 | RING, SÉALA |
| P15-03-031 | 1 | BRUSHING, MHAIGHNÉADACH, INSLITHEOIR SÉALA & CUNTÓIR |
| P40-05-216 | 1 | CÓRAS OLA COMHLACHT, ASSY, comhla, seachbhóthar, SCHROEDER |
| X20-08-505 | 8 | HHCS,.500-13UNCX1" |
| V06-50-322 | 8 | Washer, Spring Lock, CRUACH, 1/2" ID |
| X20-08-681 | 2 | HHCS,.312-18UNCX1.5"FAD |
| 000P569234 | 2 | O-RING, NITRILE 90 |
| P40-05-206 | 1 | MÁIRTEACH, STRAINER OLA AGUS Scagaire, MEAISÍNTE |
| 000P569225 | 2 | O-Fágáil, NITRILE 90 DURO |
| P40-05-430 | 1 | SCAGAIR, OLA, EILIMINT, W/Deighilteoir Súchán Maighnéadach SKB 1 1/2 |
| X26-02-924 | 2 | FLANGE, CÓD SAE 61,1-1/2", UN 1/2"-13X1-1/2" CS BOLT |
| P06-00-380 | 1 | Tube, LÍNE OLA, DEIS-LÁIMH, W/STEEL HOSE |
| P40-05-032 | 3 | BOLT, diallait, OILEÁN CROSSHEAD |
| P40-05-033 | 6 | Washer, SÉALA 1/2" |
| P40-05-034 | 6 | Diallait, LÍNE OLA, CROSSHEAD OILER |
| 000P569118 | 6 | O-Fágáil, NITRILE 90 DURO |
| X26-11-086 | 1 | MODEL HOSE ASSY:421 06 06 06 06 06 500 |
| X26-02-804 | 1 | ADAPTER, CS, 3/8"NPT MALE X 9/16" JIC MALE |
| X26-02-721 | 1 | ELBOW, 1/4"NPTM X 7/16"-20 JIC37 Fireann, CRUACH |
| P60-05-007 | 1 | HOSE ASSY - 10.00" LG W/1/4" Críochnaíonn SEA 37 DEG SWVL |
| X26-02-722 | 1 | ADAPTER, CS, 1/8"NPT MALE X 7/16" JIC MALE |
| P40-05-420 | 1 | Scagaire, OLA, EILIM, 25M |
| P40-05-049 | 1 | CLAMP, EXHAUST,4 1/2", STEMCO |
| P40-05-048 | 1 | BRAKET, SCHROEDER, FILTER |
| X00-01-571 | 2 | NUT, 3/8"-16UN-3B |
| Seachbhóthar Córas Ola Schroeder | ||
| Cuid | Ceathair | Cur síos |
| P40-05-216 | CÓRAS OLA COMHLACHT, ASSY, comhla, seachbhóthar, SCHROEDER | |
| P40-05-201 | 1 | COMHLACHT, Comhla, seachbhóthar, CÓRAS OLA SCHROEDER |
| P40-05-211 | 1 | EARRACH, seachbhóthar, brú OLA 80~100PSI |
| P40-05-213 | 1 | Scriú, Coigeartú, Seachbhóthar, CÓRAS OLA SCHROEDER |
| P40-05-214 | 1 | CAP, BY-PASS, CÓRAS OLA SCHROEDER |
| P40-05-215 | 1 | CÓRAIS OLA GAISCÉAD, CBT, Scriú, seachbhóthar, SCHROEDER |
| P40-05-212 | 1 | Liathróid, CRUACH,2", CHROME STEEL, |
| Fo-thionól Lubricator Crankshaft | ||
| Cuid | Ceathair | Cur síos |
| X20-28-509 | 4 | nigheoir, glas, 5/16" |
| X20-08-576 | 4 | HHCS, 5/16"-18UN 1"FAD SAE GRÁD 5 |
| P15-12-031 | 1 | NUT, 63121 COSANTA Snáithe, 7/8"- 18UNS W |
| P15-11-031 | 1 | Gaiscéad, oiriúntóir tiomántán, CAP, galún CURTÓIR |
| P15-10-031 | 1 | INJUCTOR, OLA, CRANKSHAFT, W/#20 HOSE oiriúntóir |
| P15-08-031 | 1 | RING, COINNEÁIL |
| P15-09-031 | 1 | GASCET, INJUCTOR, CRANKSHAFT, OLA W/#20 oiriúntóir |
| P15-04-031 | 1 | RING, SÉALA |
| P15-03-031 | 1 | BUSHING, mhaighnéadach, inslitheoir rónta & Tiomáint COUNTER |
| P15-05-031 | 1 | Séala, Maighnéadach, Seafta, MSC, |
| 000P569120 | 1 | O-Fágáil, NITRILE 90 DURO |
| 000P569126 | 1 | O-Fágáil, NITRILE 90 DURO |
| Fo-thionól Clúdach Cás | ||
| Cuid | Ceathair | Cur síos |
| P40-11-600 | FO-CHUMHACHT CÁS, DEIREADH CUMHACHTA ASSY, RH TIOMÁNA |
|
| P60-14-006 | 2 | Plocóid, Píobán Soicéid, 1/8"NPT |
| X26-22-026 | 1 | Plocóid, Píobairí, 1"NPT, CEANN CEARNACH |
| X20-08-571 | 48 | HHCS, 5/16"-18UN 3/4" FAD |
| X20-28-509 | 16 | nigheoir, glas, 5/16" |
| P40-11-016 | 1 | PLÁTA, Clúdach, INJECTOR OLA |
| P40-11-017 | 1 | GASCET, OLA INECTOR, Clúdach PLÁTA |
| X20-08-502 | 58 | HHCS, 5/16"-18UN 3/4" FAD |
| P40-11-008 | 57 | NIGHTHEOIR, COMHRÉAL, 5/16", WI, PL |
| P40-11-020 | 35 | Washer, SÉALA, 5/16", BARWOOD |
| P40-11-028 | 1 | CLÚDACH, LONG, CROSSHEAD Sleamhnán |
| P40-11-019 | 1 | Gaiscéad, Clúdach, LONG, Crosshead SLÍODH |
| P40-11-042 | 1 | CUMHACHT-CRÍOCH, CÁS, MEAISÍNTE, CEART-LÁIMHE TIOMÁNA |
| P40-11-002 | 3 | Gaiscéad, ROCHTAIN Slat A cheangail CLÚDACH |
| P40-11-001 | 2 | CLÚDACH, ROCHTAIN Slat A CHEANGAL |
| P40-11-006 | 1 | tionóil Clúdaigh |
| P40-11-005 | 1 | DIPSTICK, OIL, 4 1/4" OD FILLER NECK |
| P40-11-034 | 1 | Clúdach, CIGIREACHT, GEARAÍ |
| P40-11-033 | 1 | GASCET, Clúdach, CIGIREACHT, GEARAS |
| X26-02-028 | 2 | breiseán, 1/2"NPT(4N- 08) |
| P40-11-029 | 1 | BAFFLE, ISTEACH, GEAR TITHÍOCHT |
| P40-11-032 | 1 | GASCET, Clúdach, GEARAS CIGIREACHTA |
| P40-11-035 | 1 | Clúdach, Pláta, GEAR TITHÍOCHT |
| X20-08-576 | 4 | HHCS, 5/16"-18UN 1"FAD |
| P40-11-025 | 1 | CLÚDACH, GEARR, Sleamhnán CROSSHEAD |
| P40-11-026 | 1 | Plocóid, Píobairí, 1"NPT, CEANN CEACHT |
| Cuid | Ceathair | Cur síos |
| P40-11-000 | FO-CHUMHACHT CÁS, DEIREADH CUMHACHTA ASSY, LH DRIVE |
|
| P60-14-006 | 2 | Plocóid, Píobán Soicéid, 1/8"NPT |
| X26-22-026 | 1 | Plocóid, Píobairí, 1"NPT, CEANN CEARNACH |
| X20-08-571 | 48 | HHCS, 5/16"-18UN 3/4" FAD , |
| X20-28-509 | 16 | nigheoir, glas, 5/16" |
| P40-11-016 | 1 | PLÁTA, Clúdach, INJECTOR OLA |
| P40-11-017 | 1 | GASCET, INJECTOR OLA, PLÁTA Clúdaigh |
| X20-08-502 | 58 | HHCS, 5/16"-18UNX1/2" FAD |
| P40-11-008 | 57 | NIGHTHEOIR, COMHRÉAL, 5/16", WI, PL |
| P40-11-020 | 35 | Washer, SÉALA, 5/16", BARWOOD |
| P40-11-028 | 1 | CLÚDACH, LONG, CROSSHEAD Sleamhnán |
| P40-11-019 | 1 | Gaiscéad, Clúdach, LONG, Crosshead SLÍODH |
| P40-11-024 | 1 | CÁS, MEAISÍNTE, CEACHT-HAND TIOMÁNA |
| P40-11-002 | 3 | Gaiscéad, ROCHTAIN Slat A cheangail CLÚDACH |
| P40-11-001 | 2 | CLÚDACH, ROCHTAIN Slat A CHEANGAL |
| P40-11-006 | 1 | tionóil Clúdaigh |
| P40-11-005 | 1 | DIPSTICK, OIL,4 1/4" OD FILLER NECK |
| P40-11-034 | 1 | Clúdach, CIGIREACHT, GEARAÍ |
| P40-11-033 | 1 | GASCET, Clúdach, CIGIREACHT, GEARAS |
| X26-02-028 | 2 | breiseán, 1/2"NPT(4N- 08) |
| P40-11-029 | 1 | BAFFLE, ISTEACH, GEAR TITHÍOCHT |
| P40-11-032 | 1 | GASCET, Clúdach, GEARAS CIGIREACHTA |
| P40-11-036 | 1 | Clúdach, Pláta, GEAR TITHÍOCHT |
| X20-08-576 | 4 | HHCS, 5/16"-18UN 1"FAD, |
| P40-11-025 | 1 | CLÚDACH, GEARR, Sleamhnán CROSSHEAD |
| P40-11-026 | 1 | Gaiscéad, Sleamhnán CROSSHEAD, GAIRM CLÚDACH |
| Fo-thionól Spacer | ||
| Cuid | Ceathair | Cur síos |
| P40-15-120 | L-4 TIONÓL SPACER, LE CRUACH PLÁTAÍ AGUS Feadáin,3 3/8" |
|
| P40-15-117 | 12 | Graí, AG Gceangal, FE GO PE L-4 AGUS L-3 Spásaire |
| P40-15-105 | 3 | Slat Ceanglais, Slat Bhrúigh, L-SPACER |
| P40-15-118 | 1 | PLÁTA, CUMHACHT DEIREADH, L-4 SPACER |
| X20-08-576 | 6 | HHCS, 5/16"-18UN 1"FAD |
| X20-28-509 | 6 | nigheoir, glas, 5/16" |
| P40-15-108 | 12 | Tube, FRAME, L-4 SPACER |
| P40-15-104 | 3 | PUSH ROD, DHÁ{0}}PIECE, L-SPACER |
| 000P569223 | 3 | O-Fágáil, NITRILE 90 DURO |
| P40-15-102 | 3 | COINNEÁLRA, PUSH ROD, DÁ{0}}phíosa NÓS |
| P40-40-614 | 12 | NUT, 1"-14NF |
| P40-15-143 | 3 | ADAPTER{0}}PUSH ROD-DÁ PIECC |
| X20-08-048 | 9 | HHCS,.312-18UNCX0.750" |
| P40-11-008 | 9 | NIGHTHEOIR, COMHRÉAL, 5/16", WI, PL |
| 000P569158 | 3 | O-Fágáil, NITRILE 90 DURO |
| P40-15-113 | 3 | GLAND, cuimilteoir, T/URETÁN, L-4 AGUS L-3 Spásaire |
| P40-15-132 | 3 | TIONÓL SÉALA, DO SHlat Brúigh 3.375" |
| P40-15-109 | 3 | Fáinne, AG COINNEÁIL,437 INT,.4378-SPEC |
| P40-15-132 | 3 | TIONÓL SÉALA, DO SHlat Brúigh 3.375" |
| P40-15-107 | 3 | GLAND, cuimilteoir, T/URETÁN, L-4 AGUS L-3 Spásaire |
| Cuid | Ceathair | Cur síos |
| P40-15- 100 | L-4 TIONÓL SPACER, LE CRUACH PLÁTAÍ AGUS Feadáin, 4" |
|
| P40-15-117 | 12 | Graí, AG Gceangal, FE GO PE L-4 AGUS L-3 Spásaire |
| P40-15-105 | 3 | Slat Ceanglais, Slat Bhrúigh, L-SPACER |
| P40-15-118 | 1 | PLÁTA, CUMHACHT DEIREADH, L-4 SPACER |
| X20-08-576 | 6 | HHCS, 5/16"-18UN 1"FAD |
| X20-28-509 | 6 | nigheoir, glas, 5/16" |
| P40-15-108 | 12 | Tube, FRAME, L-4 SPACER |
| P40-15-104 | 3 | ROD PUSH, DÁ{0}}PIECE, L-SPACER, |
| 000P569223 | 3 | O-Fágáil, NITRILE 90 DURO |
| P40-15-102 | 3 | COINNEÁLRA, PUSH ROD, DÁ{0}}phíosa NÓS |
| P40-40-614 | 12 | NUT, 1"-14NF |
| P40-15- 140 | 3 | ADAPTER{0}}PUSH ROD-DÁ PIECC NÓS 4" |
| X20-08-048 | 9 | HHCS,.312-18UNCX0.750" |
| P40-11-008 | 9 | NIGHTHEOIR, COMHRÉAL, 5/16", WI, PL |
| 000P569158 | 3 | O-Fágáil, NITRILE 90 DURO |
| P40-15-113 | 3 | GLAND, cuimilteoir, T/URETÁN, L-4 AGUS L-3 SPACER |
| P40-15-132 | 3 | TIONÓL SÉALA, DO SHlat Brúigh 3.375" |
| P40-15-109 | 3 | Fáinne, Á CHOINNEÁIL, 437 INT,.4378- SPEC |
| P40-15- 132 | 3 | TIONÓL SÉALA, DO SHlat Brúigh 3.375" |
| P40-15-107 | 3 | GLAND, cuimilteoir, T/URETÁN, L-4 AGUS L-3 SPACER |
| Cuid | Ceathair | Cur síos |
| P40-15- 101 | L-4 TIONÓL SPACER, LE PLÁTAÍ AGUS Feadáin CRUACH, 4.5" |
|
| P40-15-117 | 12 | Graí, AG Gceangal, FE LE PE L-4 AGUS L-3 SPACER |
| P40-15-105 | 3 | Slat Ceanglais, Slat Bhrúigh, L-SPACER |
| P40-15-118 | 1 | PLÁTA, CUMHACHT DEIREADH, L-4 Spásaire |
| X20-08-576 | 6 | HHCS, 5/16"-18UN 1"FAD |
| X20-28-509 | 6 | nigheoir, glas, 5/16" |
| P40-15-108 | 12 | Tube, FRAME, L-4 SPACER |
| P40-15-104 | 3 | ROD PUSH, DÁ{0}}PIECE, L- Spásaire, |
| 000P569223 | 3 | O-Fágáil, NITRILE 90 DURO |
| P40-15-102 | 3 | COINNEÁLA, ROD PUSH, DÁ- Píosa Srón |
| P40-40-614 | 12 | NUT, 1"-14NF |
| P40-15- 144 | 3 | ADAPTER-PUSH ROD-TWO Srón PIECC 4.5" |
| X20-08-048 | 9 | HHCS,.312-18UNCX0.750" |
| P40-11-008 | 9 | NIGHTHEOIR, COMHRÉAL, 5/16", WI, PL |
| 000P569158 | 3 | O-Fágáil, NITRILE 90 DURO |
| P40-15-113 | 3 | GLAND, cuimilteoir, T/URETÁN, L-4 AGUS L-3 SPACER |
| P40-15-132 | 3 | TIONÓL SÉALA, DO BHRÚ ROD 3.375" |
| P40-15-109 | 3 | Fáinne, Á CHOINNEÁIL, 437 INT,.4378- SPEC |
| P40-15- 132 | 3 | TIONÓL SÉALA, DO BHRÚ ROD 3.375" |
| P40-15-107 | 3 | GLAND, cuimilteoir, T/URETÁN, L-4 AGUS L-3 SPACER |
| Sreabhán TPH400-Deiridh Páirteanna | ||
| Fo-thionól comhla shúchán | ||
| Cuid SJS | Ceathair | Cur síos |
| P40-40-200 | FO-CHUID COMHLA shúchán | |
| P40-14-202 | 2 | UAP, COTTER, 1/8"X1 1/2", SPRING STEEL |
| P40-40-214 | 1 | EARRACH, LOCK, UIMH.3 STOP SIÚCHÁIN |
| P40-40-215 | 2 | BOOT, STOP Súchán, UIMH.3, COMHLA UIMH.4 & UIMH.5 |
| P40-40-216 | 1 | COINNEÁLA, STOP AGUS EARRACH, UIMH. 3 SÚCHÁN COMHLA |
| P40-40-112 | 2 | IONSÁIGH, DO DHÁ-BRUTHÚ PÍOSA, COMHLA UIMH.4 TREOIR |
| P40-40-106 | 1 | EARRACH, Comhla, 36LB/IN |
| P40-40-107 | 1 | VALVE, FRAC,3 3/8" |
| P40-40-108 | 1 | IONSÁIGH, POLAIRETHANACH, COMHLA FRAC UIMH.3 |
| P40-40-109 | 1 | Suíochán, Comhla, barrchaolaithe, FRAC UIMH.3 |
| 000P569240 | 1 | O-RING, NITRILE 90 DURO #240, PEROXIDE CUIREADH |
| P40-40-111 | 1 | COINNEÁLA, GUIDE BUSHING,3 3/8"X1/8" |
| Cuid SJS | Ceathair | Cur síos |
| P40-44-200 | FO-CHÓMHAR LUACH Súchán,4 1/2" | |
| B01-15-003 | 1 | UAP, COTTER, 5X35 GB91 |
| P40-44-213 | 1 | EARRACH, LOCK, UIMH.4 STOP SIÚCHÁIN |
| P40-40-215 | 2 | BOOT, STOP Súchán, UIMH.3, UIMH.4 & UIMH.5 COMHLA |
| P40-44-215 | 1 | COINNEÁLA, STOP AGUS EARRACH, UIMH. 4 SÚCHÁN COMHLA |
| P40-40-112 | 2 | IONSÁIGH, DO DHÁ-PÍOS MÓRÚ, UIMH.4 TREOIR VALVE |
| P40-44-106 | 1 | EARRACH, Comhla, 25LB/IN, GAN DHONN, 4-IN.AND 4 1/2-IN |
| P40-44-107 | 1 | COMHLA, FRAC UIMH.4 FRAC |
| P40-44-108 | 1 | IONSÁIGH, POLAIRETHANACH, COMHLA FRAC UIMH.4 |
| P40-44-109 | 1 | SUÍOMH, COMHLA, FRAIC UIMH |
| 000P569244 | 1 | O-RING, NITRILE 90 DURO #244, PEROXIDE CUIREADH |
| P40-44-111 | 1 | COINNEÁLA, TREOIR-THRUSCÁIL, UIMH.4 |
| 6.1.2 Fo-Chomhthionól Comhlaí Doirteadh | ||
| Cuid | Ceathair | Cur síos |
| P40-33-100 | FO-CHUMAS COMHLA A URSCAOILEADH,3 3/8" | |
| P40-40-706 | 1 | COIRE, COVER,3 3/8" |
| P40-33-102 | 1 | CLÚDACH, GEARR, SCRÚDÚ, UIMH.3 COMHLA DÚBAILTE, GUIDED |
| P40-40-709 | 1 | Fáinne, spárálaíscáileáin, comhla scaoilte 3, |
| P40-40-708 | 1 | GASKET, Comhla Sceite UIMH.3,3 3/8" |
| P40-40-112 | 2 | IONSÁIGH, DO DHÁ-PÍOS MÓRÚ, UIMH.4 TREOIR VALVE |
| P40-40-106 | 1 | EARRACH, Comhla, 36LB/IN |
| P40-40-107 | 1 | VALVE, FRAC,3 3/8" |
| P40-40-108 | 1 | IONSÁIGH, POLAIRETHANACH, FRAC UIMH.3 COMHLA |
| P40-40-109 | 1 | Suíochán, Comhla, barrchaolaithe, FRAC UIMH.3 |
| 000P569240 | 1 | O-Fágáil, NITRILE 90 DURO #240, PEROXIDE CUREDED |
| P40-40-111 | 1 | COINNEÁLA, GUIDE BUSHING,3 3/8"X1/8" |
| Cuid | Ceathair | Cur síos |
| P40-40-100 | FO-CHUID COMHLA A URSCAOILEADH | |
| P40-40-101 | 1 | COINNEÁLA, CÚLACH, MACH, 4" FLÚID-END ASSY |
| P40-40-102 | 1 | CLÚDACH, AGHAIRM, SCRÚDÚ, UIMH.4 COMHLA DÚBAILTE, GUIDED |
| P40-40-709 | 1 | Fáinne, spásaire |
| P40-44-103 | 1 | GASCET |
| P40-40-112 | 2 | IONSÁIGH, DO DHÁ-PÍOS MÓRÚ, UIMH.4 TREOIR VALVE |
| P40-40-106 | 1 | EARRACH, Comhla, 36LB/IN |
| P40-40-107 | 1 | VALVE, FRAC,3 3/8" |
| P40-40-108 | 1 | IONSÁIGH, POLYURETHANE |
| P40-40-109 | 1 | Suíochán, Comhla, barrchaolaithe, FRAC UIMH.3 |
| 000P569240 | 1 | O-Fágáil, NITRILE 90 DURO #240, PEROXIDE CUREDED |
| P40-40-111 | 1 | COINNEÁLA, GUIDE BUSHING,3 3/8"X1/8" |
| Cuid | Ceathair | Cur síos |
| P40-44- 100 | FO-CHUID COMHLA A URSCAOILEADH,4 1/2" |
|
| P40-40-101 | 1 | COINNEÁLA, CÚLACH, MACH, 4" FLÚID-END ASSY |
| P40-40-102 | 1 | CLÚDACH, AGHAIRM, SCRÚDÚ, UIMH.4 COMHLA DÚBAILTE, GUIDED |
| P40-44-709 | 1 | Fáinne, spárálaíscáileáin, comhla scaoilte 4, 4 1/2" |
| P40-40-103 | 1 | GASKET, COMHLA URSCAOILEADH UIMH.4,4 1/2" |
| P40-40-112 | 2 | IONSÁIGH, DO DHÁ-PÍOS MÓRÚ, UIMH.4 TREOIR VALVE |
| P40-44-106 | 1 | EARRACH, Comhla, 25LB/IN, dhosmálta, 4- IN.AGUS 4 1/2-IN |
| P40-44-107 | 1 | COMHLA, FRAC UIMH.4 FRAC |
| P40-44-108 | 1 | IONSÁIGH, POLAIRETHANACH, UIMH. 4 FRAC COMHLA |
| P40-44-109 | 1 | SUÍOMH, COMHLA, FRAIC UIMH |
| 000P569244 | 1 | O-Fágáil, NITRILE 90 DURO #244, SAOROCSAÍD CUIREADH |
| P40-44-111 | 1 | COINNEÁLA, TREOIR-THRUSCÁIL, FRAC UIMH.4 COMHLA |
| Fo-thionól Pacáil | ||
| Cuid | Ceathair | Cur síos |
| P8T0009337 | PACÁISTIÚ, SPS, ASSY, 3.375, TPH400 | |
| P803370125 | 1 | PACÁISTIÚ, SPS, junk Fáinne, 3.375X4.375X0.125 |
| P902503370 | 1 | PACÁISTIÚ, SPS, HEADER Fáinne, 3.375X4.375 |
| P907503370 | 1 | PACÁISTIÚ, SPS, V4 RING, 3.375X4.375 |
| P904503370 | 1 | PACÁISTIÚ, SPS, FEMALE oiriúntóir, 3.375X4.375 |
| 000P569243 | 1 | O-Fágáil, NITRILE 90 DURO #243, SAOROCSAÍD CUIREADH |
| P833371980 | 1 | PACÁISTIÚ, SPS, LANTERN Fáinne, 3.375X4.375X1.981 |
| P905503370 | 1 | PACÁISTIÚ, SPS, WS SÉALA, 3.375X3.875X0.413 |
| P8T0009400 | PACÁISTIÚ, ASSY, 4", TPH400 | |
| P804000125 | 1 | PACÁISTIÚ, SPS, junk Fáinne, 4.000X5.000X0.125 |
| P902504000 | 1 | Fáinne CEANN ,98.1X126.8X21.6 |
| P907504000 | 1 | Fáinne VD, 100.8X127.8X10.2 |
| P904504000 | 1 | Adapter FEMALE, 101.6X126.9X12.3 |
| 000P569248 | 1 | O-FÁG, 119X3.55 |
| P834002360 | 1 | PACÁISTIÚ, SPS, LANTERN Fáinne, 4.000X5.000X2.361 |
| P905504000 | 1 | SÉALA OLA, 101.6X114.3X9.6 |
| P8T0009450 | PACÁISTIÚ, ASSY, 4.5", TPH400 | |
| P804500125 | 1 | PACÁISTIÚ, SPS, junk Fáinne, 4.500X5.500X0.125 |
| P902504500 | 1 | Fáinne CEANN, 110.8X139.5X21.6 |
| P907504500 | 1 | Fáinne VD, 113.5X140.5X10.2 |
| P904504500 | 1 | Adapter FEMALE, 114.3X139.6X12.3 |
| 000P569252 | 1 | O-FÁG, 132X3.55 |
| P834502360 | 1 | PACÁISTIÚ, SPS, LANTERN Fáinne, 4.500X5.500X2.361 |
| P905504500 | 1 | SÉALA OLA, 112.8X128.2X9.6 |
| Fo-thionól Cnó Pacáil | ||
| Cuid | Ceathair | Cur síos |
| P40-33-410 | FO-THÓMHAR FO-THÓGÁLA SRUTHAIR,3 3/8- IN |
|
| P40-33-411 | 1 | NUT, COigeartú PACÁISTIÚ,3 3/8" |
| P40-33-414 | 1 | SLEEVE, WIPER GLAND,3 3/8-IN. |
| P40-40-415 | 1 | UAP, GROOVE, 1/2"X1 1/4" |
| P40-40-410 | FO-THIOMPAR FOLÁN cuimilteora, 4" FLUID-END ASSY |
|
| P40-40-411 | 1 | Cnó, Coigeartú Pacála, TRUE 4" |
| P40-40-414 | 1 | muinchille, glandóir cuimilteora, 4" |
| P40-40-415 | 1 | UAP, GROOVE, 1/2"X1 1/4" |
| P40-44-410 | FO-THÓMHAR FO-THÓGÁLA SRUTHAIR,4 1/2" | |
| P40-44-411 | 1 | NUT, COigeartú PACÁISTIÚ,4 1/2" |
| P40-40-414 | 1 | muinchille, glandóir cuimilteora, 4" |
| P40-40-415 | 1 | UAP, GROOVE, 1/2"X1 1/4" |
| Fo-thionól Flange Scaoilte Bán | ||
| Cuid | Ceathair | Cur síos |
| P40-33-600 | AN FLAIN BÁN, 3 3/8", TPH400 | |
| P40-33-711 | 1 | SÉALA, PASSAGE DÍOLACHÁIN, 2 1/2" OD |
| P40-33-611 | 1 | AN LÁTHAIR BÁN, SCEOLADH, CLIATH ASCHUIR,3 3/8" -IN. |
| P40-40-614 | 2 | NUT, 1"-14NF, INMHEÁNACH WRENCHING |
| P40-40-600 | TIONÓL FLANGE W/TWO- PÍOSA PACÁISTIÚ NUT |
|
| P40-40-612 | 1 | SÉALA, SLIOMADH SCEIMHLITHE, 3 3/8"OD |
| P40-40-611 | 1 | FLANG BÁN |
| P40-40-614 | 2 | NUT, , SCRÚDÚ INMHEÁNACH |
| Fo-thionól Flange Scaoilte Cuartha | ||
| Cuid | Ceathair | Cur síos |
| P40-33-620 | TIONÓL FLANGACH, AR CHÉILE-LÁIMH, 3 3/8" | |
| X05-91-537 | 1 | SÉALA, Fáinne,2", FIG 2002, AONTAIS |
| P40-33-626 | 1 | FLANGE, SCEARTÚ, 20000PSI WECO THREAD, LEFT |
| P40-40-614 | 2 | NUT, 1"-14NF, sreangú inmheánach |
| P40-44-627 | 2 | Graí, Flange Sceite, 6" |
| P40-33-711 | 1 | SEAL, SALACH SCEIMHLITHE, 2 1/2" OD |
| X05-91-537 | 1 | SÉALA, Fáinne,2", FIG 2002, AONTAIS |
| Cuid | Ceathair | Cur síos |
| P40-40-610 | AR DHEART-AN TIONÓL FLANGE LÁIMH | |
| F4P-10-229 | 1 | SÉALA, Fáinne, 2", FIG 1502,1002,602,402, AN tAONTAS |
| P40-40-626 | 1 | FLANGE, NOCHTADH, CEART-LÁIMH,3" asraon |
| P40-40-614 | 2 | Cnó, sracadh INMHEÁNACH |
| P40-40-612 | 1 | SEAL, SALACH SCEIMHLITHE,3 3/8"OD |
| F4P-10-258 | 1 | Séala, Fáinne, 3" FIG 1502 AONTAS |
| Sreabhán-Deireadh na Rannóige Fo-thionól | ||
| Cuid | Ceathair | Cur síos |
| P40-33-700 | FLÚID-DEIREADH AN ROINN, FO-CHUIDEACHTA, 3 3/8" |
|
| P40-33-705 | 1 | BOLT, BARR-TIE, 30" LONG, 4340 ROLLED SCRÍOBH |
| P40-40-704 | 2 | NUT, BARR{0}TIE-BOLT, RC30-24, W/TAPERED Snáitheanna |
| P40-44-715 | 1 | BOLT, BOTTOM TIE , Sorcóir |
| P40-44-714 | 2 | NUT, STOP leaisteacha, 3/4"-16NF |
| P40-33-712 | 2 | SLIOMADH SCEIMHLITHEOIRÍ SPACER.INNER,3 3/8" DEIREADH LUACH |
| P40-33-711 | 4 | SEAL, SALACH SCEIMHLITHE, 2 1/2" OD |
| V06-37-861 | 6 | breiseán, píopa, 1/8", STD SQ |
| P40-33-710 | 3 | SLÚCHÁN-DEIREADH ROINN, MEAISÍN 3 3/8" |
| P40-40-709 | 3 | Fáinne, spárálaíscáileáin, comhla scaoilte 3, 3 3/8" |
| P40-40-708 | 3 | GASKET, COMHLA URSCAOILEADH UIMH.3, 3 3/8" |
| P40-40-707 | 3 | CLÚDACH, CEANN Sorcóir,3 3/8" |
| P40-40-706 | 3 | COIRE, COVER,3 3/8" |
| Cuid | Ceathair | Cur síos |
| P40-40-750 | FLÚID-END SECTION FO-SHEIRBHÍS | |
| P40-40-705 | 1 | BOLT, BARR{{0}TIE, 3 DISCHARGE FLANGE,6" |
| P40-40-719 | 2 | NIGHTHE, CRUAITE, 2.31 "ODX1.43"ID, F/TOP-TIE-BOLT |
| P40-40-704 | 2 | NUT, BARR{0}TIE-BOLT, RC30-24, W/TAPERED Snáitheanna |
| P40-40-714 | 2 | BOLT, TIE, HT-400,1" DIA., DO TRÍ BARR{0}}TIE-BOLT |
| P40-40-712 | 2 | SLIOMADH SCEIMHLITHEOIRÍ SPACER.INNER,3 3/8"OD |
| P40-40-612 | 4 | SEAL, SALACH SCEIMHLITHE,3 3/8"OD |
| V06-37-861 | 6 | breiseán, píopa, 1/8", STD SQ |
| P40-40-751 | 3 | SLÚCHÁN-DEIREADH AN ROINN, MEAISÍN 4" |
| P40-40-709 | 3 | Fáinne, spásaire |
| P40-40-708 | 3 | GASCET |
| P40-40-707 | 3 | CLÚDACH, CEANN Sorcóir,3 3/8" |
| P40-40-706 | 3 | COIRE, COVER,3 3/8" |
| Cuid | Ceathair | Cur síos |
| P40-44-750 | FO-CHUIDEACHÁN DEIREADH Sreabhán,4 1/2" |
|
| P40-40-705 | 1 | BOLT, BARR-TIE, 3 NOCHTADH Flange, 6" |
| P40-40-719 | 2 | NIGHTHE, CRUAITE, 2.31 "ODX1.43"ID, F/TOP-TIE-BOLT |
| P40-40-704 | 2 | NUT, BARR-TIE-BOLT, RC30- 24, W / Snáitheanna barrchaolaithe |
| P40-44-715 | 1 | BOLT, BOTTOM TIE , Sorcóir |
| P40-44-714 | 2 | NUT, STOP leaisteacha, 3/4"-16NF |
| P40-40-712 | 2 | SPACER.INNER SCRÚDÚ PASSAGE,3 3/8"OD |
| P40-40-612 | 4 | SEAL, SALACH SCEIMHLITHE,3 3/8"OD |
| V06-37-861 | 6 | breiseán, píopa, 1/8", STD SQ |
| P40-44-751 | 3 | SEACHADACH-DEIREADH AN ROINN, MEAISÍN 4"&4 1/2" |
| P40-44-709 | 3 | Fáinne, SPACER, UIMH. 4 SCRÚDÚ VALVE, 4 1/2" |
| P40-40-103 | 3 | GASKET, COMHLA URSCAOILEADH UIMH.4,4 1/2" |
| P40-44-707 | 3 | Clúdach, CEANN Sorcóir, 4" AGUS 4 1/2" |
| P40-40- 101 | 3 | COINNEÁLA, CÚLACH, MACH, 4" FLÚID-END ASSY |
| Uirlisí Caidéil | ||
| Cuid | Ceathair | Cur síos |
| P40-09-200 | TIONÓL uirlisí, TPH400 3 3/8" | |
| P40-09-002 | 1 | UISCE, PlunGER A bhaint |
| P40-09-003 | 1 | TOOL, PACÁISTIÚ INSERTING |
| P40-09-007 | 1 | IONSÁIGH uirlis SHÁSÁLA |
| P40-09-009 | 1 | WRENCH, PACÁISTIÚ cnó a choigeartú |
| P40-09-040 | 1 | UIRlis, STOP AGUS SUITEÁIL SPRING |
| P40-09-064 | 1 | TACAÍOCHT, WRENCH TPH400 4", 3 3/8" |
| P40-09-044 | 1 | PUNCH , TREOIR A BHAINT AMACH , COMHLA UIMH.3 AGUS UIMH.4 |
| P40-09-050 | 1 | PULLER ASSY., DO CHUID COMHLA ,4" 3 3/8" TPH400 |
| P40-09-059 | 1 | UIRlis IONSÁLA, SUÍOMH COMHLA UIMH. 4 (4", 4 1/2") |
| P40-09-060 | 1 | WRENCH , TIE-ROD |
| P40-09-058 | 1 | WRENCH, srón plunger. |
| P40-09-056 | 1 | Uirlis IONTÁLA , LEATH Plunger |
| P40-09-057 | 1 | Uirlis Isteach. Ceangail-ROD HALF |
| P40-09-061 | 1 | WRENCH TORQUE ,200~1000 N*M , 3/4" |
| P40-09-063 | 1 | HEX. L-EOCHAIR. MÉID 1" , FAD 9 11/32" |
| Cuid | Ceathair | Cur síos |
| P40-09- 100 | tionóil uirlisí , 4". TPH400 | |
| P40-09-002 | 1 | UISCE, PlunGER A bhaint |
| P40-09-003 | 1 | TOOL, PACÁISTIÚ INSERTING |
| P40-09-007 | 1 | IONSÁIGH uirlis SHÁSÁLA |
| P40-09-009 | 1 | WRENCH, PACÁISTIÚ cnó a choigeartú |
| P40-09-040 | 1 | UIRlis, STOP AGUS SUITEÁIL SPRING |
| P40-09-064 | 1 | TACAÍOCHT, WRENCH TPH400 4", 3 3/8" |
| P40-09-044 | 1 | PUNCH , TREOIR A BHAINT AMACH , COMHLA UIMH.3 AGUS UIMH.4 |
| P40-09-050 | 1 | PULLER ASSY., DO CHUID COMHLA ,4" 3 3/8" TPH400 |
| P40-09-059 | 1 | UIRlis IONSÁLA, SUÍOMH COMHLA UIMH. 4 (4", 4 1/2") |
| P40-09-060 | 1 | WRENCH , TIE-ROD |
| P40-09-058 | 1 | WRENCH, srón plunger. |
| P40-09-056 | 1 | Uirlis IONTÁLA , LEATH Plunger |
| P40-09-057 | 1 | Uirlis Isteach. Ceangail-ROD HALF |
| P40-09-061 | 1 | WRENCH TORQUE ,200~1000 N*M , 3/4" |
| P40-09-063 | 1 | HEX. L-EOCHAIR. MÉID 1" , FAD 9 11/32" |
| Cuid | Ceathair | Cur síos |
| P40-09-000 | TIONÓL uirlisí, TPH400 4 1/2" | |
| P40-09-002 | 1 | UISCE, PlunGER A bhaint |
| P40-09-003 | 1 | TOOL, PACÁISTIÚ INSERTING |
| P40-09-007 | 1 | IONSÁIGH uirlis SHÁSÁLA |
| P40-09-009 | 1 | WRENCH, PACÁISTIÚ cnó a choigeartú |
| P40-09-040 | 1 | UIRlis, STOP AGUS SUITEÁIL SPRING |
| P40-09-043 | 1 | TACAÍOCHT, WRENCH TPH400 4 1/2" |
| P40-09-044 | 1 | PUNCH , TREOIR A BHAINT AMACH , COMHLA UIMH.3 AGUS UIMH.4 |
| P40-09-030 | 1 | PULLER ASSY., VALVE SEAT NO. 4 FRAC |
| P40-09-059 | 1 | UIRlis IONSÁLA, SUÍOMH COMHLA UIMH. 4 (4", 4 1/2") |
| P40-09-060 | 1 | WRENCH , TIE-ROD |
| P40-09-058 | 1 | WRENCH, srón plunger. |
| P40-09-056 | 1 | Uirlis IONTÁLA , LEATH Plunger |
| P40-09-057 | 1 | Uirlis Isteach. Ceangail-ROD HALF |
| P40-09-061 | 1 | WRENCH TORQUE ,200~1000 N*M , 3/4" |
| P40-09-063 | 1 | HEX. L-EOCHAIR. MÉID 1" , FAD 9 11/32" |
Clibeanna Te: caidéil plunger tph400 agus gabhálais, caidéil plunger tSín tph400 agus gabhálais monaróirí, soláthraithe, monarcha
